| Item | Item | Order Number | Cost | Cost | SubTotal | Terra-Glide Motor Co. | |||
| Quantity | Description | Each | x Qty | Jack Hester | |||||
| 1 | Left Bearing Race | 416-39 | Received | $35.00 | $35.00 | $347.80 | 27. Dec. 2003 | ||
| 2 | Retaining Ring | 423-39 | Received | $2.00 | $4.00 | ||||
| 1 | Oil Slinger/Bearing End | 421-39 | Received | $8.00 | $8.00 | ||||
| 1 | Left Bearing Washer | 422-39 | Received | $5.00 | $5.00 | ||||
| 0 | Left Case Roller Set | 419-29 | $42.00 | $0.00 | |||||
| 0 | Sprocket Shaft | 352-29 | Original | $40.00 | $0.00 | ||||
| 1 | Right Bearing Race | 413.39A | Received | $35.00 | $35.00 | ||||
| 0 | Right Case Roller Set | 414-37 | $21.00 | $0.00 | |||||
| 1 | Right Bearing Washer | 414-39A | Received | $5.00 | $5.00 | ||||
| 0 | Gear (Pinion) Shaft | 355-37 | Original | $70.00 | $0.00 | ||||
| 0 | Crank Pin w/Nuts | 348-37 | Original | $35.00 | $0.00 | ||||
| 1 | Flywheel Thrust Washers | 372-21 | On Hand | $5.00 | $5.00 | ||||
| 0 | Rod Bearings – Complete | 309-29 | $35.00 | $0.00 | |||||
| 1 | Set – Connecting Rod Races | NOSparts -> | CRR-45 | $23.00 | $23.00 | ||||
| 2 | Wristpin Bushings | 293-36 | On Hand | $8.00 | $16.00 | ||||
| 1 | Tappet Guide Screw Kit | C8103-16 | Received | $7.50 | $7.50 | ||||
| 1 | Crankcase Oil Strainer Cork | R24978-57 | Received | $0.50 | $0.50 | ||||
| 1 | Crankcase Bolt Kit | C9697-17 | Received | $20.00 | $20.00 | ||||
| 1 | Cam Gear Cover Screw Set | C9413-19 | Received | $11.00 | $11.00 | ||||
| 10 | 0.007" Cam Shim | R664-37C | Received | $0.50 | $5.00 | ||||
| 4 | Cam Bushing Pin | 661-31 | Received | $1.00 | $4.00 | ||||
| 1 | Idler Gear Washer | R462-11 | Received | $0.30 | $0.30 | ||||
| 1 | Idler Gear Stud Spring Ring | R658-15 | Received | $0.70 | $0.70 | ||||
| 0 | Cylinder Base Nut Set | C9624-16 | Received | $7.50 | $0.00 | ||||
| 1 | Set of Valve Covers | $0.00 | $0.00 | ||||||
| 1 | Front Chain Oiler Pipe | R543-37A | Received | $5.00 | $5.00 | ||||
| 1 | Oil Pump Mounting Kit | C9663-22 | Received | $12.50 | $12.50 | ||||
| 0 | Flutter Valve (Breather) | R504-37 | $8.00 | $0.00 | |||||
| 2 | Crankpin Lockwashers | 368-12 | $3.00 | $6.00 | |||||
| 2 | Crankpin Lockwasher Screws | R030Z | $0.30 | $0.60 | |||||
| 0 | Upper Motor Mount Bolt Kit | C9781-5 | $6.00 | $0.00 | |||||
| 1 | Lower Motor Mount Bolt Kit | C9626-16 | Received | $20.00 | $20.00 | ||||
| 0 | Cylinder Head Bracket | 2806-41MP | $25.00 | $0.00 | |||||
| 0 | Cylinder Head Bracket Spacer Washer | 0232P | $1.00 | $0.00 | |||||
| 0 | Cylinder Head Bracket Spacer | 2806-40AP | $6.00 | $0.00 | |||||
| 4 | Cam Bushing | R661-37A | $7.00 | $28.00 | |||||
| 0 | Gen. Relay 1/4-24 NS Mounting Screw | 051 | $2.00 | $0.00 | |||||
| 2 | NOS Pistons 0.010” OS | 253-29D | $35.00 | $70.00 | |||||
| 2 | Manifold Nut | R1115-32 | $10.00 | $20.00 | |||||
| $0.00 | |||||||||
| $0.00 | |||||||||
| $0.00 | |||||||||
| $0.00 | |||||||||
| OEM Part Number | New Number | Description |
| 010 | Screw, air intake shaft, 6-32 x 1/4” fillister head screw | |
| 010 | Screw, throttle disc, 6-32 x 1/4” fillister head screw | |
| 011 | Screw, throttle stop, 6-32 x 3/8” fillister head screw | |
| 0127 | Nut, carburetor support, 3/8”-24 U.S.F. x 21/64” x 9/16” hexagon nut | |
| 021 | Screw, connection, throttle cable | |
| 024 | Screw, throttle stop, 8-32 x 3/4” fillister head screw | |
| 032 | Screw, lever lock, 10-24 x 5/8” fillister head screw | |
| 0251 | Lockwasher | |
| 0261 | Lockwasher | |
| 1102-36A | Pipe, complete inlet | |
| 1107-36A | Pipe, inlet | |
| 1109-41 | Extension, inlet pipe | |
| 1111-36 | Support, carburetor | |
| 1112-32 | Nipple, inlet | |
| 1115-32 | Nut, inlet packing | |
| 1118-30A | Bushing, inlet packing | |
| 1121-21 | Gasket, inlet pipe | |
| 1121-39 | Gasket, carburetor insulating | |
| 1123-30 | Screw, carburetor fastening | |
| 1123-41 | Bolt, carburetor fastening | |
| 1133-41M | Carburetor, complete | |
| 1152-11 | Screw, needle valve adjustment | |
| 1153-11 | Screw, needle valve lock | |
| 1154-11 | Spring, needle valve lock | |
| 1196-11 | Pin, float lever | |
| 1197-16 | Screw, float lever pin | |
| 1226-40M | Body, Carburetor | |
| 1226-41M | Body, Carburetor | |
| 1231-33 | Shaft, air intake | |
| 1232-24 | Disc, air intake | |
| 1233-33A | Lever, air intake | |
| 1233-41M | Lever, air intake | |
| 1234-24 | Screw, air intake lever | |
| 1238-37 | Lever, throttle | |
| 1243-24 | Shaft, throttle | |
| 1244-24 | Disc, throttle | |
| 1245-24 | Bushing, throttle shaft | |
| 1247-32 | Spring, throttle disc | |
| 1248-40M | Screw, high speed needle valve lock | |
| 1249-38D | Jet, filxed No. 4 | |
| 1249-41 | Jet, fixed, .052” hole | |
| 1251-33 | Plug, idle passage | |
| 1252-41 | Tube, air bleed | |
| 1252-41A | Screw, tube holder | |
| 1254-40M | 27298-40 | Valve, high speed needle |
| 1254-40MS | Valve, high speed needle, special extra long threads (1/4”-40 Tap) | |
| 1257-33 | Spring, nozzle retainer | |
| 1258-33 | 27331-33 | Nozzle, main |
| 1261-27 | Valve, low speed needle | |
| 1262-27 | Collar, spring | |
| 1263-24 | Plug, drill | |
| 1264-27 | Spring, needle valve | |
| 1265-30A | Venturi, 1-1/16” | |
| 1265-41M | 27364-41 | Venturi, 15/16” |
| 1267-24 | Bowl, assembly | |
| 1267-33 | Bowl, only | |
| 1268-29 | Nut, bowl lock | |
| 1269-28 | Gasket, bowl lock nut | |
| 1269-39 | Screw, bowl drain | |
| 1271-33 | Float | |
| 1272-33 | Lever, float | |
| 1273-33A | Valve and seat, float | |
| 1275-33 | Cap, bowl | |
| 1285-33 | Washer, inlet pipe | |
| 1292-27 | Lever, needle valve | |
| 1293-27 | Screw, lever | |
| 1296-26 | Spring, friction | |
| 1297-26 | Ball, friction | |
| 3370-36 | Connection, throttle cable (includes 021 Screw) |
| Overall Paint: QM Specification ES-No. 474 => | Enamal | Synthetic | Olive Drab (lusterless flat) |
| Component | Finish | ||
| Engine | |||
| Valve Covers | Cad-Plated | ||
| Tappet Guide Screws | Cad-Plated | ||
| Timing Gear Cover Screws | Cad-Plated | ||
| Timing Plug | Cad-Plated | ||
| Oil Pump Spring Caps | Cad-Plated | ||
| Feed Oil Pump Studs and Nuts | Cad-Plated | ||
| Crankcase Relief Pipe Screws | Cad-Plated | ||
| Oil Pressure Switch | Cad-Plated | ||
| Generator Mounting Screws | Cad-Plated | ||
| Timer Control Bracket | Cad-Plated | ||
| Upper and Lower Motor Mount Bolts | Parkerized | ||
| Upper and Lower Motor Mount Washers and Nuts | Parkerized | ||
| Top Motor Mount Bracket | Parkerized | ||
| Tall Head Bolts (14) 14-40M | Parkerized | ||
| Long Head Botls (2) 14-40MA | Parkerized | ||
| Cylinder Base Studs and Nuts | Parkerized | ||
| Crankcase Bolts, Studs, and Nuts | Parkerized | ||
| Crankcase Drain Plug | Parkerized | ||
| Crankcase Relief Pipe | Parkerized | ||
| Feed Oil Pump Bolt | Parkerized | ||
| Scavenger Oil Pump Studs, Bolts, and Nuts | Parkerized | ||
| Cylinders | Black | ||
| Generator Steel Body | Black | ||
| Generator End Cover | Black | ||
| Generator Mounitn Strap | Black | ||
| Exhaust Pipe | Black | ||
| Muffler Clamps | Black | ||
| Carburetor Body | Silver | ||
| Oil Pump Bodies | White | ||
| Tappet Blocks | White | ||
| Aluminum Heads | Natural | ||
| Crankcases | Natural | ||
| Gear Cover | Natural | ||
| Carburetor Bowl | Natural | ||
| Generator Commutator End Piece | Natural | ||
| Carburetor | |||
| Carburetor Drain Plug | Bright Nickel-Plate | ||
| Carburetor Idle Cover Hole Screw | Bright Nickel-Plate | ||
| Carburetor Body Plugs | Bright Nickel-Plate | ||
| Carburetor Float Bearing Screws | Bright Nickel-Plate | ||
| Carburetor Float Valve Cover Cap | Bright Nickel-Plate | ||
| Carburetor Float Valve | Bright Nickel-Plate | ||
| Carburetor Low-speed Needle Lever | Bright Nickel-Plate | ||
| Carburetor Throttle Shaft | Natural Brass | ||
| Carburetor Throttle Disc | Natural Brass | ||
| Manifold and Nuts | Cad-Plated | ||
| Inlet Pipe Extension 1109-41 | Cad-Plated | ||
| Choke Lever | Cad-Plated | ||
| Choke Shaft | Cad-Plated | ||
| Choke Disc | Cad-Plated | ||
| Lever Screws | Cad-Plated | ||
| Low-speed Lever Bolt | Cad-Plated | ||
| Low-speed Needle Knob | Cad-Plated | ||
| High-speed Lock Screw | Cad-Plated | ||
| Bowl Lock Nut | Cad-Plated | ||
| Throttle Cable Connector 3370-36 | Cad-Plated | ||
| Carburetor Mounting Bolts 1123-41 | Parkerized | ||
| Carburetor Support Bracket | Parkerized | ||
| Carburetor Throttle Lever | Parkerized | ||
| Carburetor Connector | Olive-Drab | ||
| Air Cleaner | |||
| Air Cleaner Hose Clamps | Cad-Plated | ||
| Air Cleaner Mounting Bolts, Nuts, and Washers | Cad-Plated | ||
| Carburetor Connector Screws 1409-41M | Parkerized | ||
| Air Cleaner Mounting Plate Bolts and Nuts | Parkerized | ||
| Oil Bath Air Cleaner | Olive-Drab | ||
| Air Cleaner Mounting Plate and Clamps | Olive-Drab | ||
| Air Cleaner Hose | Black Material |
| Original Cost | $394.61 | ||
| Old Number | New Number | Casting Number | |
| Cylinders | F: 2-40BM | 16460-40 | F: 120-36 |
| R: 3-40BM | 16461-40 | R: 120-361 | |
| Heads | F: 9-40M | 16692-40 | 5 |
| R: 10-40M | 16695-40 | 5 |
| Inches | ||
| Pinion Shaft O.D. | Original | |
| Pinion Shaft Bearing Race I.D. | Lapped Size | |
| Pinion Shaft Rollers O.D. | Std. | |
| Clearance | 0.0008 | Desired |
| Sprocket Shaft O.D. | Original | |
| Sprocket Shaft Bearing Race I.D. | Lapped Size | |
| Sprocket Shaft Rollers O.D. | Std. | |
| Clearance | 0.0005 | Desired |
| Crank Pin O.D. | Original | |
| Connecting Rod Race I.D. | Lapped Size | |
| Connecting Rod Rollers O.D. | Std. | |
| Clearance | 0.0008 | Desired |